Use 120 camera for 3D photo modeling

YunKey Technology uses 120 multi-eye cameras to form a camera matrix for 3D shooting modeling.The camera matrix consists of a high resolution distribution without the need for a switch to be low on landing, few connection lines are used, and it is easy to install and easy to use.

1. Requirements description

11, Rapidly establish high-precision models

1, Rapidly establish high-precision models

2, simple and convenient installation and use

2. Technical requirements

111201201201201201201201201201201601202800-16003120120

3. Working principle

This system uses120120Taiwan multi-mesh cameras form a wrap-around camera matrix to instantly collect photos of the target at each angle, and output photos to fit3DModel.

IV. Practical application scenarios

IV. Practical application scenarios

Introduction to the application of camera matrix

120Photo.

Step 2. Application software: Through the camera application software provided by our company or (our company provides completeSDKFor users to develop camera application software themselves) control the camera matrix to collect photos and transmit them to the computer. After the user confirms that it is correct, create a photo folder and save it.

3D3D3DMRMeshRoom, RC Reality Capture, RM ReMakeRM ReMakeetc.

1. Instant snapshot: The camera matrix is ​​120High resolution cameras are distributed, each camera is equipped with a trigger, which can achieve nanosecond real-time synchronous shooting.

2. High image quality: use120800-1600800-1600megapixel multi-eye camera creates wonderful details and textures, making the picture (details) clear and sharp.

3. Simple installation: The camera matrix is ​​15120The cameras on each upright bracket are connected in parallel, without a switch, which facilitates installation and wiring while reducing the cost of project landing.

4. Simple use: through the camera application software provided by our company or (completed by our companySDKuser can develop camera application software by itself) control the camera matrix to collect photos and transfer them to the computer. After the user confirms that it is correct, it creates a photo folder and saves it. The saved photo files are imported into the 3D3D3Drebuild the software and the software can automatically generate the 3D3D3D3D3D3D3D3D3D3D3D3D3D3D3D3D

5. Flexibility: According to the needs of the shooting content, you can flexibly adjust the "format" and the number of cameras to achieve the shooting effect.font-family: 16px; font-family: 安体;">

5. Application prospect

Yunyi Technology uses multiple multi-eye cameras to form a camera matrix without the need for a switch to land low cost, use few connection lines, and is simple to install and easy to use.font-family: Helvetica;">3D现下载;">现下载;">现下载;">现下载;">现下载;">现下载;">现下载;">现下载;">现下载;">现下载;">现下载;">现下载;">现下载;">现下载;">现下载;">现下载;">现下载;">现下载;">现下载;">现下载;">现下载;">现下载;">现下载;">现下载;">现下载;">现下载;">现下载;">现下载;">现下载;">现下载;">现�rgb(255, 255, 255); font-family: Helvetica;">3D3D3D3D3D3DResponse.